Coats 1250-2D Tire Balancer with Warranty - Remanufactured

Description

Remanufactured
Coats 1250-2D
Wheel Balancer
A High Volume Solution
This machine is a
complete
tear down to the frame
Frame is refinished with
new
industrial grade paint and labels.
Every component is
completely
taken apart and rebuilt with
new
internal parts.
Most important of all, we back up our machines
100 percent
with a 1 year parts warranty with full technical support
and
we have the customers
to prove it.
We have been in business
22 years
and
19 years
on Ebay with a 100 percent positive feedback rating.
There are plenty of copycats in this industry, but there is only ONE
®
What Makes Us Different Is Our Process
Our Machines Are More Than A Quick Paint Job
True Rebuilds Require The Following
·
Balancer is completely disassembled down to the Frame.
·
Frame is stripped, primed and repainted with original factory paint.
·
Direct Drive Motor is disassembled and cleaned thoroughly and then repainted and tested.
·
Encoder is checked for proper function and replaced with
NEW
as needed.
·
Cooling Fan is cleaned and tested.
·
PCB Board is taken off the Control Panel and cleaned and tested with factory diagnostic equipment to meet load ratings.
·
Control Panel is cleaned and tested with Factory Diagnostic Equipment specific to this panel.
·
Motor Control Boards tested with Diagnostic Equipment.
·
Limit Switches are tested and replaced with
NEW
as needed.
·
ALL  Plastic Trim ? Hood ? Tray ? Shroud on Motor ? Cone Holder ? Screen Holder are cleaned and refinished.
·
Each Cone Set and Hub Nut that comes with the Balancer is sand blasted clean and checked for defects. Then tested to ensure they fit Balancer Shaft for accurate balancing.
·
Each hub is cleaned and relubricated.
·
After the Balancer is reassembled it is recalibrated and tested a minimum of 50 times with various size rims and tires to ensure the Motor Mount Piezos are reading true and  the overall performance of the Balancer is ready for daily operation.
·
All
Factory Labels are replaced with Brand
NEW
Labels
·
Complete PDF copies of the Operator and Spare Parts Manuals come with each machine.
·
The Balancer is then stretch wrapped and banded to a pallet with steel strapping for safe shipping worldwide.
All Balancers Come With a Buyer?s Protection Parts Warranty
1 Year On Drive Motor and 90 Days On Remaining Major Components
With Full Technical Support
Key Features
Automatic offset and diameter data entry for both clip and Tape-A-Weight? increases productivity and provides accuracy for single-spin balances.
Direct Tape-A-Weight? placement and laser-guided operation eliminates guesswork, resulting in single-spin Tape-A-Weight? balances.
Easy behind-the-spoke weight placement helps maintain a ?clean? look on custom wheels.
1.5 HP Direct Drive motor delivers best-in-class speed, accuracy and longevity. Click
here
to learn more about the COATS® Direct Drive system.
Control panel with easy-to-read position indicators and an integrated VFD screen delivers ease of use and promotes proper balancing techniques.
Direct-select any of eight balancing modes, including several alloy options, plus patch balance.
Simultaneous display of static and dynamic data identifies any excess residual static imbalance, and helps technicians eliminate this leading cause of comebacks.
Specifications
Balancing Modes
8
Tire Diameter
Up to 44"
Rim Width
Rim diameter
2" to 20"
8" to 30"
Max. Tire Wt.
160 lbs.
Shaft Diameter
28mm or 40mm
Shaft Length
8-5/8"
Resolution: Oz.
0.01
Resolution: Degrees
1.4
Accuracy: Oz.
0.1
Power Requirement
220v AC, 1P, 60Hz
220v AC, 3P, 60Hz
Accessory Storage
Optional Peg Kit (8111480)
Footprint
57"W x 50"D
Shipping Weight
625 lbs.
REMANUFACTURED BY:
®
Industrial Engineered Solutions
BUY NOW -
99.00
Remanufacturing Service Available
for your Coats
®
, Corghi
®
, or John Bean
®
Tire Equipment
(Please visit our store for more information)
Trade in
your tire equipment for one of our completely rebuilt units...
We also purchase used tire equipment
We are the largest tire equipment rebuilder in the US
contact us for more detailed information
CONTACT US FOR DISCOUNTS ON PURCHASES OF MULTIPLE MACHINES
--  9.00 Shipping  --
Shipping Cost
for this item is to most locations in the US and Canada
Certain remote locations may require additional cost
Shipping costs includes delivery of your order to a business address
with a dock or other way to load or unload truck
Liftgate, Residential, and Limited Access Delivery
require additional costs if needed for shipment.
Contact us with any questions you may have
ALL MAJOR CREDIT OR DEBIT CARDS ACCEPTED
9 am - 5 pm Eastern Time
Monday - Friday
Yes we ship International
Additional shipping cost applies - Call for Quote
Please visit our store for more tire maintenance equipment
Click here
to add us to your eBay favorites list.
Seller reserves the right to withdraw item from auction at anytime due to prior sale.
IES sells Quality remanufactured products
The contents of this EBAY listing refers to remanufactured products and/or equipment.
IES takes pride in the extensive rebuilding efforts its trained technicians provide for every piece of equipment sold.
Each product listing details the remanufacturing process IES uses for each product it sells.
The products sold on EBAY have not been endorsed by or approved by the original manufacturer and the products do not fall under the original manufacturer's warranty.
Where indicated, IES provides buyer protection for a parts warranty and full technical support.
COATS®, ROBO-ARM®, RIM CLAMP®, GRIP-MAX®, and other trademarks are registered trademarks owned by Hennessy Industries, Inc.
Please contact us if you have additional questions.